Send us a text

By providing your phone number, you consent to receive calls and transactional/informational text messages (SMS) from Smithe Hardwood Flooring LLC, powered by Topline Pro, including calls and messages made using AI-powered technology. You can unsubscribe at any time by replying STOP. Message and data rates may apply. Message frequency varies.

By submitting this form, you agree to our Terms of Service & Privacy Policy.

Water Damage Repair

Our Flooring Services company offers expert water damage and repair solutions, ensuring your home's flooring is restored to pristine condition quickly and efficiently, protecting it from future issues.
Water Damage Repair

Water-damaged floor repair in Portland, OR

Water-damaged hardwood? Let us take a look

Cupped, buckled, stained or gapping boards do not always mean a new floor. We follow the moisture with a meter, remove the damaged boards, dry the area, then lace in new boards and refinish so the repair blends in. We repair only the damaged area, not the whole floor.

  • Free quotes
  • Insurance work on hardwood
  • Oregon CCB #262995
  • Mon to Fri, 9:00am to 5:00pm

We dry it, then we repair it

Water runs to the lowest point, so the damage can be bigger than the visible spot. We follow the moisture with a meter and remove damaged boards until the readings are dry.

Then we dry the area with dehumidifiers and fans while we watch the readings. Drying often takes weeks and can run up to about a month. Not sure what you have? Start with a free quote.

Signs of water damage

What water-damaged wood floors look like

Check your floor against this list. Spotting any of these is a good reason to get a quote.

Cupping

Board edges rise higher than the center, so each board looks dished like a shallow tray. A tell-tale sign of moisture.

Crowning

The center of the board is higher than its edges, so the floor feels ridged.

Buckling

Boards lift and pull up from the subfloor, sometimes in a visible peak.

Dark staining

Dark patches or rings in the wood, often following the edges of boards or a seam.

Gaps between boards

Boards that shrank after swelling can leave open seams.

Soft or squeaky spots

The floor flexes or gives underfoot, or squeaks where it did not before.

White or gray finish

The finish turns cloudy, white or gray in patches.

Not sure what you are seeing?

Get a free quote and we will talk through what you are seeing.

Get a Free Quote

Why act early

Small problems get bigger when wood stays wet

Wood that stays damp keeps moving, and the damage can spread beyond the first boards.

The damage spreads

Water runs to the lowest point, and swelling boards push on their neighbors. A few boards can grow into a much larger repair.

The cause keeps working

The source of the water has to be found and stopped, or a repaired floor will go the same way again.

Finish and stain set in

Dark stains and clouded finish are harder to remove the longer they sit.

How we approach the repair

Repair that blends in with the rest of your floor

The goal is a floor that looks like nothing happened. Here is how a repair goes, start to finish.

1

Spot the damage

We look for cupping and other signs, and work out where the water came from.

2

Follow the moisture

A moisture meter shows how far the water went, which can be well past the visible spot.

3

Remove damaged boards

Boards come out until the readings are dry.

4

Dry the area

Dehumidifiers and fans run while we monitor the readings. It often takes weeks, and can run up to about a month.

5

Lace in new boards

New boards are laced in to match the floor. We replace only the damaged area, not the whole floor.

6

Refinish so it blends

The repaired area is refinished to blend with the rest. See refinishing. For other board damage, see our floor repair service.

Oak floor board repair near a kitchen range with tools laid out on the floor
Board repair underway
Oak floor with replaced strip boards beside kitchen cabinets blending into the surrounding floor
Replaced boards beside cabinets
Oak floor board being replaced with a nail gun and chisel
Replacing a damaged board
Opened section of oak floor with a saw, toolbox and replacement boards ready
Section opened up for repair

Insurance work

We do insurance work on hardwood floors

If water damaged your hardwood floor and insurance is involved, this is how it usually goes.

1

Talk to your insurer

You tell your insurance company what happened. They set a budget and let you choose your contractor.

2

Call us

Once you have your budget and have picked your contractor, you call us at (503) 664-9525.

3

We match your floor

We repair the floor to match how it was, so the finished repair blends in.

Coverage and the claim itself stay between you and your insurer.

Common questions

Water-damaged floor FAQ

Can damaged boards be saved, or must they be replaced?

It depends on the damage. We follow the moisture with a meter and remove damaged boards until the readings are dry, because water runs to the lowest point and the damage can be bigger than the visible spot. Boards that read dry and are in good shape stay in the floor. We assess it in person.

Will the new boards match my existing floor?

That is the goal. We match the existing floor as closely as we can, lace the new boards in, then refinish so the repair blends in. Aged and sun-faded floors can take some blending.

How long does drying take?

Drying often takes weeks and can run up to about a month, depending on how wet the floor got and what caused it. We bring dehumidifiers and fans and watch the readings. Once the floor reads dry, the new boards and the refinish follow, which adds finish and cure time. We give you a timeline with your quote.

Do I need to dry the floor myself first?

No, drying is part of our work. We find where the moisture went, remove damaged boards, and dry the area with dehumidifiers and fans while we monitor the readings. Tell us what caused the water so we can account for it.

Do you replace the whole floor?

No. We repair only the damaged area, not the whole floor. The new boards are laced in and refinished so the repair blends in with the rest.

Do you work with insurance?

Yes, on hardwood floors. Usually you talk to your insurer first, they set a budget and let you choose your contractor, and then you call us. We match the floor to how it was. Coverage and the claim itself stay between you and your insurer.

What is the difference between cupping and crowning?

Cupping is when board edges rise higher than the center, usually from moisture coming from below. Crowning is when the center is higher than the edges, which can follow moisture from above or a cupped floor drying out.

How do I get a quote?

Quotes are free. Text us, chat with us on the phone, then receive your quote. Use the button below or call (503) 664-9525, Monday to Friday, 9:00am to 5:00pm.

Ready when you are

Get a free quote on your floor repair

Tell us what you are seeing. We will help you work out the next step.

1

Text us

Tell us about the room and what you have in mind.

2

Chat on the phone

We talk through the details together.

3

Receive a quote

Your free quote for the work.

Serving Portland, Sandy, Gresham, Beaverton, Tigard, Aloha, Lake Oswego, Oregon City, Tualatin, Estacada, Hillsboro and Wilsonville, Oregon. Oregon CCB #262995. Office hours Monday to Friday, 9:00am to 5:00pm.

Ready to get started?

Book an appointment today.