Send us a text

By providing your phone number, you consent to receive calls and transactional/informational text messages (SMS) from Smithe Hardwood Flooring LLC, powered by Topline Pro, including calls and messages made using AI-powered technology. You can unsubscribe at any time by replying STOP. Message and data rates may apply. Message frequency varies.

By submitting this form, you agree to our Terms of Service & Privacy Policy.

Smithe Hardwood Flooring LLC

Hardwood Floor Installation and Refinishing in Portland, OR

We install, refinish and repair hardwood floors across the Portland metro. Oregon CCB #262995. Quotes are free, and it starts with a text.

  • Oregon CCB #262995
  • Free quotes
  • Open Mon to Fri, 9:00am to 5:00pm
Mirror-glossy refinished oak floor in a dining room with an arched alcove, Portland-area hardwood refinishing

Refinished oak floor

What we do

Hardwood floor services for Portland-area homes

From a new install to a worn floor that needs new life, here is where most calls start. Pick the one that fits, or text us and we will help you figure it out.

  • Newly installed oak hardwood floor in a bright room with a large window

    Floor Installation

    Nail-down, glue-down or floating installs. Every job starts with a moisture reading, and every floor gets at least 7 days to acclimate.

    Floor Installation details →
  • Mirror-finish refinished oak floor in a living room with white built-in shelves

    Refinishing

    Sanded to bare wood, stained if you want a color, then finished in oil-based or water-based. Buffing coats too.

    Refinishing details →
  • LVP

    LVP

    Water-resistant luxury vinyl plank, usually installed as a floating click-lock floor.

    LVP details →
  • Opened section of floor with a saw, toolbox and replacement boards ready for a repair

    Water Damage Repair

    We follow the moisture with a meter, remove damaged boards, dry the area, then lace in new boards and refinish so it blends.

    Water Damage Repair details →
  • Oak floor with replaced strip boards beside kitchen cabinets

    Floor Repair

    Damaged boards replaced so the floor looks whole again. Only the damaged area gets replaced, not the whole room.

    Floor Repair details →
  • Laminate

    Laminate Flooring

    Laminate for rooms where it fits. Tell us about the space and we will talk it through.

    Laminate Flooring details →

Something else on your list? See our other services.

Oak floor half finished with a glossy coat next to raw boards during a refinish

Flooring Finishes

Oil-based or water-based: which fits your home?

Both protect the wood. Oil-based is our go-to for most homes. Water-based is the pick when odor, timing or low-VOC rules matter.

Oil-based

A richer, deeper amber look. Typically 2 coats of a catalyzed, two-part finish.

Strong odor and flammable, so people and pets stay out early on. Plan on about 3 weeks for most of the cure before rugs go back down.

Water-based

Low odor, and it airs out in about 3 days. Typically 3 coats, rarely 4, and two can go on in one day.

Tones run from natural to amber to darker. It is the one to use on jobs with low-VOC limits.

Times are typical. The crew confirms timing for your floor and your room.

How it works

Getting your free quote takes three steps

  1. 1

    Text us

    Send a message about your floors and what you want done.

  2. 2

    Chat on the phone

    We talk through the job, the room and any questions you have.

  3. 3

    Receive a quote

    You get a free quote for the work, so you can decide with the details in hand.

Why homeowners choose us

The careful parts happen before the first board goes down

Good hardwood work depends on what you do before and around the install or refinish. Here is how we approach it.

  • Moisture meter before every job

    We take a moisture reading before any install or job. If the readings run high, we wait for the floor to dry.

  • At least 7 days to acclimate

    Every floor type gets a minimum of seven days to acclimate, and longer is better. It helps prevent gaps and uneven boards.

  • Sanded to bare wood

    A full refinish takes the old finish and stain down to bare wood, so you start from a blank canvas.

  • We match your floor after water damage

    We find the damaged area, remove the boards, dry it out, then lace in new boards and refinish so the repair blends in. Only the damaged area is replaced.

  • Help with insurance work

    On a hardwood floor claim, talk to your insurer first. They set a budget and let you choose your contractor. Then call us, and we match the floor to how it was.

  • Oregon CCB #262995

    We are a licensed Oregon contractor, and your quote is free.

Our work

Real floors from real projects

A look at finished floors, stained and natural, plus a few steps along the way. There are more than 100 project photos in the gallery.

Service areas

Hardwood floor work across the Portland metro

We work in Portland and the towns around it. Find yours below. Not sure we cover your street? Text us or call and ask.

Oak hardwood floor leading into a kitchen with wood cabinets in a Portland-area home

Reviews

See what other homeowners have shared

Read what homeowners have to say about working with us, in their own words.

Common questions

Quick answers before you call

How do I get a quote?

Quotes are free. Text us, chat with us on the phone, then you receive your quote. We are open Monday to Friday, 9:00am to 5:00pm.

What kinds of floor work do you do?

Hardwood floor installation, refinishing, water damage repair and floor repair, plus LVP and laminate flooring. If your project is something else, ask us. You can also see our other services.

Should I choose an oil-based or water-based finish?

Oil-based is our go-to for most homes, with a richer, deeper amber look. Water-based has low odor and airs out faster, and it is the one to use on jobs with low-VOC limits. If anyone in your home is sensitive to odor, we steer you to water-based.

Our flooring finishes guide walks through the differences.

How long until the rugs go back down?

It depends on the finish. After an oil-based finish, plan on about 3 weeks for most of the cure. A water-based finish typically airs out in about 3 days. The crew confirms the timing for your floor and tells you when it is ready.

What happens before a hardwood install?

We take a moisture meter reading before every job. If the readings run high, we wait for the floor to dry. The wood then gets at least 7 days to acclimate, and longer is better, which helps prevent gaps and uneven boards.

On concrete, we measure the moisture and use sealers when needed. We will not install over chipboard, so it comes out or plywood goes over it.

How do you repair water damaged floors?

We look for cupping, follow the moisture with a meter, and remove damaged boards until the readings are dry. Water runs to the lowest point, so the damage can be bigger than the spot you can see. We dry the area with dehumidifiers and fans while monitoring the readings, which often takes weeks and can run up to about a month.

Then we lace in new boards to match and refinish so the repair blends in. Only the damaged area is replaced, not the whole floor.

Can you work with my insurance company?

Yes, on hardwood floors. Talk to your insurer first. They set a budget and let you choose your contractor. Then call us, and we match the floor to how it was.

Free quote

Ready to talk about your floors?

Three easy steps. Quotes are free.

  1. 1Text us
  2. 2Chat on the phone
  3. 3Receive a quote

Oregon CCB #262995. Open Monday to Friday, 9:00am to 5:00pm. Serving Portland, Sandy, Gresham, Beaverton, Tigard, Aloha, Lake Oswego, Oregon City, Tualatin, Estacada, Hillsboro and Wilsonville, OR.